Online Support
Hunting & Guns
Air Guns
Firearm Accessories
Shooting Gear
Air Soft & Green Gas
Hunting Gear
Targets
Non-Lethal Defense
Blank Guns
Slingshots
Books & DVDs
Optics
Night Vision
Scope Mounts
Rifle Scopes
Spotting Scopes
Binoculars
Rangefinders
Optics Accessories
Boating
Marine Navigation
Marine Equipment
Electrical Components
Safety & Survival Gear
Boating Accessories
Water Sports
Electronics
Non Marine Navigation
Marine Equipment
Fishing Electronics
Entertainment
Safety Equipment
Radios & Communications
CB Radios
VHF Radios
Single Side Band
Radio & Phone
Fishing
Fishing Electronics
Fishing Equipment
Fishing Tackle
Cameras
Trail Cameras
Camping & Hiking
GPS & Navigation
Knives & Game Shears
Flashlights
Camping Accessories
Fitness
Clothing
Automotive
Audio & Video
GPS Automotive
GPS Automotive Equip
Reloading Equipment
Archery & Bows
Arrows
Bowstrings
Crossbows
Shipping & Tracking
Contact & FAQ
Site Security
Warranty Information
Payment Options
30-Day Return Policy
Returns & Exchanges
Copyright Notice
Tested Daily 10/14/2008
Home
>
Radios & Communications
>
Single Side Band
>
Icom
Icom AT - 130 HF Automotic Antenna Tuner, Part # AT-130
AT - 130 HF Automatic Antenna Tuner
Tune in your HF marine world
Suitable for many vessels
The versatile AT-130 can be used with a variety of vessels, even smaller boats that cannot use a long antenna element. For example, the AT-130 will match a 7 m (23 feet) long wire antenna across the marine band in the 1.6 - 27.5 MHz range.
Automatic tuning
No manual tuning is needed. Just push the [TUNE] switch on an Icom HF marine transceiver; the AT-130 adjusts the antenna and the transceiver to the minimum SWR in any frequency on an HF marine band. The AT-130 allows you to transmit with strong RF output power, and is perfect for maritime mobile operations.
Weather resistant
The AT-130 is housed in a durable, completely weather-resistant acrylic case with rubber gaskets. This allows it to be conveniently installed near the antenna element base.
For Icom HF marine transceivers
Icoms sophisticated AT-130 easily matches Icom HF marine transceivers. The AT-130 easily interconnects with an Icom HF marine transceiver. AT-130 installation is simple. No adjustments are necessary. Just connect the control cable and antenna wire and go!
Quick tune-up
Improved tuning performance...the tune-up time is less than 3 seconds in any frequency on an HF marine band. In addition, the AT-130 has 8 convenient memories to store tuning information. Retuning for a memorized frequency takes about 1.5 seconds. This allows you quick trouble-free frequency changes.
Low power tune-up
The AT-130 emits very little output power (just 300 mW) during the tuning process. This reduces the possibility of causing interference to other stations using the frequency.
Specifications
Dimensions: 230(W) x 340(H) x 80(D) mm; 9.1(W) x 13.4(H) x 3.1(D) in (projections not included)
Weight: 2.7 kg; 6.0 lb
Usable Temperature Range: -30C ~ +60C
Rated Voltage: 13.6 V DC +/-15% (negative ground) (supplied from an Icom HF marine transceiver)
Current Drain (at 13.6 V DC): 2 A
Frequency Coverage: 1.6~30 MHz (with the antenna length 7 m (23 ft) or longer)
Input Impedance: 50 ohms (unbalanced)
Max. Input Power: 150 W (PEP)
Input Power During Tuning: 10 W
Auto Tuning Time: 1.5 sec. (returning for a memorized frequency), typically 2~3 sec. (when operating band has been changed)
Auto Tuning Accuracy: VSWR 2.0:1
Insertion Loss: 0.5 dB (with a 50 ohms load, after tuning)
Accessories:
Owners Manual,Mounting Bracket,Power Cable
Item #: AT-130
UPC Code: 731797802446
Availability:
4
Items
act fast inventory is limited!
MSRP:
$625.00
Your Price:
$469.97
Add the item to your cart to use our "quick" shipping estimator.
Copyright 1998 - 2008 J & M Enterprises, LLC -- All Right Reserved
Warning All Images Are Copyrited And Protected With Digimark!